Add to Compare

Add to wishlist

CROCODILE

GROUT GLASS BLOCK CROCODILE WHITE 1kg | CROCODILE | 910

SKU:  185718
0 Reviews

45.00 THB

Buy Online, Save Extra 1.35 THB Today!
Check Availability for delivery
Check Availability for Store Pick up

Add to Compare

Add to wishlist


GROUT GLASS BLOCK CROCODILE WHITE 1kg

  • Crocodile Glass Block Grout
  • High Performance Cement Grout (Sanded)
  • Professionally formulated for glass block; extra bonding for greater strength; no chipping or cracking
  • With Microban™, prevents black mold and algae
  • Just tile over, no chiseling

    1 INSTALLATION

    PREPARATION
    Clean and remove any dirt or contaminations remaining in the joints. Make sure the joints are clean and dry before grouting.

    MIXING
    Mix 1 kg of grout powder with 0.2-0.23 liters of clean water, or 4 parts grout to 1 part water (by volume). Add the grout into the water and mix well by hand or low speed drill. Allow the grout to slake for 10 minutes, then remix. The mix should be stirred intermittently during application. Do not add water or grout after this point. If the grout has become too stiff to work, discard it and make a new batch.

    APPLICATION
    Wait a minimum of 24- 48 hours after tile installation. Grout all areas of the installation with the exact same procedure. The most consistent results can be achieved by filling the joints with grout, then using a rubber face trowel and working diagonally across the grout joints to both fill and compact the joints. As soon as possible, remove all excess grout with the trowel. The less grout left on the face of the tile, the easier the final clean-up will be.

    FINAL CLEAN-UP
    After 10 days, the area may be re-cleaned to remove any remaining grout from the surface of the tile. Scrubbing the floor with hot water and soap works best. It is not recommended that acids be used, as this cause color alteration of the grout joint. If necessary, test in an inconspicuous place first.