MOTION SENSOR LUMAX CEILING-MOUNTED 54-00105_0
MOTION SENSOR LUMAX CEILING-MOUNTED 54-00105_1

MOTION SENSOR LUMAX CEILING-MOUNTED 54-00105

Conveniently control electrical devices in your house with the ceiling-mounted motion sensor from LUMAX. It engineered to accurately detect movement and automatically turn lights or other connected devices on and off as needed without using switch, providing added safety and helping lower electricity cost. The time delay is also adjustable from 10 seconds to 7 minutes, allowing you to set turning off time for more convenient and practical use. Plus, the sensor is protected against dust according to IP20 rating, making it an ideal additional item for any buildings.

Properties
Automatic turn on the connected devices when the motion is detected
Effectively detects motion within a 360-degree-wide zone
Auotmatic turn off the connected devices after 8 minutes of nonmovement
Features adjustable time delay range from 10 seconds to 7 minutes
Compatible with 1,200W incandescent lamps
Suitable for use with fluorescent lamp with power under 300W
Dustproof according to IP44 standard
Product Usage
For detecting motion with infrared sensor.
Product Tips
Install the product in proper position.
Securely connect the wires and tighten screws.
Cautions
The compatible voltage must not exceed from what is stated on the device or package.
Do not modify or misuse the product.
Cut off the power before installation or maintenance.
Keep away from all source of flame and dampness.
Keep out of reach of children.
View All
Hide
xxxx
BRAND LUMAX
Height (cm) 14.5
Width (cm) 12
Depth (cm) 10
Weight (kg) .23
SENSOR DETECTION RANGE 16M
ELECTRICAL CURRENT (A) 6A
   
SOCKET, SWITCH AND LIGHT BULB REPLACEMENT 390 THB

What customers will receive

  • Servicing for replacing socket, switch, bulb or installing new ones in place of the old one, where the electrical wiring has been pre-installed.
  • Service fee includes labor cost only.
  • 180-Day warranty
  • Servicing duration: 45 - 60 minutes
  • Customer shall prepare the necessary product and equipment set beforehand.

Servicing for replacing and installing sockets, switches and light bulbs or installing new ones in place of the old one from HomePro, one of the best services out there, is carried and performed by qualified technical teams of experts that has passed training from Department of skill Development. Essential tools and care in every step are provided throughout the servicing. Technicians with high expertise in this particular field and standard service procedures promise a worthwhile servicing.

Service Procedures

  1. Carry out inspection to determine the appropriateness for replacement and installation of sockets, switches and light bulbs with the existing electrical system
  2. Apply protective layering on ceiling, floor and wall
  3. Remove existing sockets, switches and light bulbs (In case of replacement)
  4. Perform installation or replacement of sockets, switches and light bulbs
  5. Inspect the electrical system
  6. Run post-inspection after the installation
  7. Tidy up around the worksite and hand over the successful job to the customer along with providing suggestions and maintenance guidelines

Terms and Conditions

  1. Rescheduling/alteration of the servicing date can be feasible at least 2 days prior to the servicing date.
  2. Liability coverage for any possible damages of items or properties caused by the team will be compensated according to the actual price but is limited to the twice amount of the service fee.
  3. The company reserves all rights to preclude these flowing circumstances.
    • Customer hires third party/unaffiliated personnel to fix, alter, or modify the works of the company.
    • Customer hires the company’s service team to perform or carry other tasks or procedures apart from what is stated in the service report sheet without informing the company or the company’s consent.
    • Improper usage/maintenance, accidents or parts that exceed expiration date.
  4. In case of additional equipment provided by the customer, 50% of their total price or value will be additionally charged as the labor cost.
  5. Service completion will be deemed final once the customer or induvial on behalf of the customer signs for the completion of service acceptance. There shall be additional charges for any further changes required by the customer.
  6. Inquiry of permits and security deposit with any government agencies, legal entity of housing estate/condominium, or neighbors must be handled and sorted out by the customer.
  7. For further inquiries or additional services, please reach out to “HomePro Service” counter at all HomePro stores or contact Call Center 1284 / Line ID: @changhomepro.
View All
Hide
SOCKET/SWITCH INSTALLATION 650 THB

What customers will receive

  • Servicing for installing sockets/switches (surface-mounted conduit wiring)
  • Service fee includes labor cost and standard installation equipment (electric wires, conduits, etc.) determined by the company.
  • 180-Day warranty
  • Servicing duration: 60 - 120 minutes
  • Customer shall prepare socket/switch for installation.

Servicing for installing sockets/switches from HomePro, one of the best services out there, is carried and performed by qualified technical teams of experts that has passed training from Department of skill Development. Essential tools and care in every step are provided throughout the servicing. Technicians with high expertise in this particular field and standard service procedures promise a worthwhile servicing.

Service Procedures

  1. Carry out inspection to determine the appropriateness for installation of sockets/switches
  2. Apply protective layering on ceiling, floor and wall
  3. Remove existing sockets, switches, downlights and light bulbs (In case of replacement)
  4. Perform installation of sockets, switches, downlights and light bulbs
  5. Installing/wiring the electrical system
  6. Recheck the electrical system
  7. Run post-inspection after the installation
  8. Tidy up around the worksite and hand over the successful job to the customer along with providing suggestions and maintenance guidelines

Terms and Conditions

  1. Rescheduling/alteration of the servicing date can be feasible at least 2 days prior to the servicing date.
  2. Liability coverage for any possible damages of items or properties caused by the team will be compensated according to the actual price but is limited to the twice amount of the service fee.
  3. The company reserves all rights to preclude these flowing circumstances.
    • Customer hires third party/unaffiliated personnel to fix, alter, or modify the works of the company.
    • Customer hires the company’s service team to perform or carry other tasks or procedures apart from what is stated in the service report sheet without informing the company or the company’s consent.
    • Improper usage/maintenance, accidents or parts that exceed expiration date
  4. In case of additional equipment provided by the customer, 50% of their total price or value will be additionally charged as the labor cost.
  5. Service completion will be deemed final once the customer or induvial on behalf of the customer signs for the completion of service acceptance. There shall be additional charges for any further changes required by the customer.
  6. Inquiry of permits and security deposit with any government agencies, legal entity of housing estate/condominium, or neighbors must be handled and sorted out by the customer.
  7. For further inquiries or additional services, please reach out to “HomePro Service” counter at all HomePro stores or contact Call Center 1284 / Line ID: @changhomepro.
View All
Hide
All Products
93K
Score
0.00
Chat Response
N/A
Review from buyers
0 / 5
5
4
3
2
1
Show all reviews0 From Reviews
Sort review by

MOTION SENSOR LUMAX CEILING-MOUNTED 54-00105

SKU: 1069511
Sold by: HomePro
Chat
  ()

Bought in past month 74 Person(s)
฿ 390 /each
฿ 770
  • Automatic turn on the connected devices when the motion is detected
  • Effectively detects motion within a 360-degree-wide zone
  • Auotmatic turn off the connected devices after 8 minutes of nonmovement
SENSOR DETECTION RANGE 16M
SENSOR DETECTION RANGE 16M
ELECTRICAL CURRENT 6A
ELECTRICAL CURRENT 6A
add icon Additional service
Qty
In stock 107 each
Compare
Product details
Current Product
MOTION SENSOR LUMAX CEILING-MOUNTED 54-00105
4 (74)
฿ 390
770-49%
MOTION SENSOR HACO CEILING MOUNTED LX-PR-20B
0 (88)
589 THB - 599 THB
MOTION SENSOR HI-TEK CEILING MOUNTED HEMX02000S
0 (59)
฿ 510
SMOKE DETECTOR HI-TEK HSXX000098
0 (59)
฿ 440
BRAND LUMAX HACO HI-TEK HI-TEK
Width (cm) 12 11.5 11.5 7
Height (cm) 14.5 11.5 11.5 16
Depth (cm) 10 5.5 2.2 12
Weight (kg) .23 .2 .08 .21
SENSOR DETECTION RANGE 16M 4 METER 6M 3M
ELECTRICAL CURRENT (A) 6A 6 AMPERE 3A -
   

Shop Top Scores


Added 
{product_name}
Quantity 1
Suggested Items